当前位置: 首页 » 每日文章 » 工业网罩自动焊接设备 运线机设备详情概述

工业网罩自动焊接设备 运线机设备详情概述

zs9008 每日文章 2018-07-16 118 0

工业自动焊机

设备概述:
先将焊接好的网罩主骨架放入夹具模具中,直接布好网线于夹具模中并收紧,然后放置上网罩平面围边排焊机指定位置并对准需要排焊的网罩主骨架上,开启开关即可自动一次性排焊好单支网罩主骨架上的平面围边排焊,在选择排焊顺序时,请采用“十”字对角排焊的依次顺序排焊,确保成品的圆弧度均匀。

多排可调焊极,多种排焊功能选择,根据不同产品只需更换焊极、夹具模或者调整焊极位置,便能达到各种不同产品的焊接,选择本机可以省去螺旋线的运线、平面排焊、围边排焊等繁多工序,从而节约人力物力,大大提高了生产效率,真可谓一机多用。

本机控制器系统采用日本三菱PLC,操作面板采用人机对话界面,界面为中英文(可选)显示,采用单片机集成电路控制、高精密度拔码式开关、焊接初级回路采用双向水冷可控硅控制等先进技术,从而更能保证电流输出平稳、可靠。并采用优化设计、高导电磁材料制作,致使设备在空载时损耗低、功率输出更强劲、稳定、寿命更长。

First the welded nets cover skeleton into fixture in the mould, direct cloth good string in tightening fixture in mold, then set Internet mask plane surrounding edge row specified position on need and welding line of welding outskirt, netting covers open switch can automatic one-off row welding good single nets cover on the outskirt of plane surrounding edge row, row in the choice of welding welding sequence, use "ten" word diagonal line of welding in order to ensure the circular arc welding, finished product even density.

Many row adjustable welding extremely, DuoZhong row welding function selection, according to different products only need to change a, welding fixture mode or adjust welding position, can achieve very different products of welding, choose the machine can leave out the line of the spiral, plane row of welding, and surround the welding process, various row and save manpower material resources, enhanced the production efficiency, it can be multi-usage.

This machine controller system from Japan mitsubishi is used PLC, operation panel man-machine dialog interface, interface is both in Chinese and in English (optional) display, USES the monolithic integrated circuit control, coda code type switch, welding pull out the primary loop cooling by using the two-way thyristor control, advanced technology, which can ensure that current output more smooth and reliable. And adopting the optimization design, high conductivity, the electromagnetic material production equipment in no-load loss low power output, more powerful, and stability, long service life.

工业网罩性能特点:

网罩特点:线材制品、风机网罩、风机网,由钢板网经过裁剪、冲压成型,表面喷塑、浸风塑、镀锌处理。形状美观、构造简洁、结构牢固、耐腐蚀、不生锈、易清洗。广泛用于机械防护,抽油压机防护,空提案、电机、排风扇等的防护罩。
材料工艺:材质:不锈钢丝,低碳钢丝 工艺:校丝,打圈,焊接,打磨,校正以及表面处理,通常表面处理都有浸塑,喷塑,镀锌,镀铬,电解抛光等。
设备用途:空调、电机、排风扇等的防护罩 产品规格大小、尺寸可按客户来样、来图定制定做。

工业网罩自动焊接视频

分享:

发表评论